Tom
Activity overview
Latest activity by Tom-
Tom created a post, Function Combinations
Combine the Pan, Tilt or Roll function with a Tap or Click function. This would send a different Tap note or CC depending on where in the range you are in the Pan (Tilt, Roll).
-
Tom created a post, Multiple Messages With Click Function
Allow the Click function to send multiple messages in sequence. This would be useful for midi commands that require more than one CC message in sequence. Could also make this work for the Tap funct...
-
Tom created a post, Wave and WIDI Master
I purchased WIDI Master after receiving the Wave ring. Updated to the latest (non beta) WIDI Master firmware and went through the process of connecting the two according to the instruction (three t...
-
Tom commented, Thanks for getting back to me. You're right - my mistake, apologies. I didn't check the type of default button that is selected when adding the tap function manually. I was confused by the fact tha...
-
Tom created a post, Tap Function Sensitivity Indicator in Softwave
When setting up a tap function (in standalone mode) with Softwave I noticed that the sensitivity indicator does not always register a tap and does not appear to give a good indicator of sensitivity...
-
Tom created a post, Issue in Standalone Mode with Only One Preset
I have found what I think is an issue with setting up 1 preset in standalone mode: remove all existing presets in standalone mode and start with a new blank preset. Set up one of each action (not s...
-
Tom created a post, Configure Wave with gimbal-like properties.
I noticed that when you roll the Wave, for example moving your hand from horizontal to vertical, the other 2 planes, tilt and pan rotate accordingly with the roll; as your hand remains vertical (as...
-
Tom created a post, Set Active Mode Via External MIDI in Standalone Mode
Idea is to allow an external midi message to set the Active mode on and off when in Standalone Mode. I am thinking of cases when, for example, you are playing the guitar and want to enable active m...
-
Tom created a post, Scrolling Through Presets
I just received my Wave today so I am still getting to know all the features etc. Amazing piece of technology! One thing I have noticed when setting up presets within the Standalone Preset Bank: i...