How to update Wavefront

Follow this step by step guide to update the firmware on your Wavefront.


  1. Power down your rack.
  2. Hold down the button on Wavefront and power the rack on again.
  3. Wavefront's LED should be flashing rapidly. Wavefront is now in "update mode".
  4. Make sure Bluetooth is enabled on your computer and that you have the latest version of Softwave (Learn about Softwave here).
  5. Start Softwave, it should automatically detect Wavefront and prompt for an update.
  6. After the update is complete, Wavefront will restart and the LED will start be fading in and out slowly again.
  7. Now you can connect your Bluetooth MIDI device to Wavefront.
Was this article helpful?
1 out of 2 found this helpful



Article is closed for comments.