To connect Wave make sure it is turned on. You turn Wave on by pressing its Middle button. Also make sure Bluetooth is turned on in your device.
You can connect Wave to your iPad and iPhone. It works on an app-to-app basis so you need to connect Wave through the application you want to use it with - not through the regular Bluetooth Settings.
- Turn Wave on. Make sure Bluetooth is turned on on your device.
- Navigate to the app you want to use Wave with.
- Find the app's settings (usually a wrench or a gear icon) and find Bluetooth MIDI (as long as the app supports Bluetooth MIDI devices).
- You should see Wave on a list of Bluetooth MIDI devices. Press connect.
- If the app you're using does not provide an option to pair Bluetooth MIDI devices, download this application and use it connect Wave to your device.
- Turn Wave on. Make sure Bluetooth is turned on on your device.
- Navigate to the system settings (gear icon).
- Select Connected Devices and select Bluetooth.
- Select Pair new device.
- You should see Wave on the list. Press it to connect it.
- Once your Bluetooth MIDI device is paired, it’ll show up in the list of Paired devices.
- Now go over to the application you want to use Wave with (as long as it can send MIDI) and map the functions to parameters.
- The WIDI Master consists of two units. The bigger unit connects to the MIDI OUT port of your instrument, and the smaller unit connects to MIDI IN.
- Turn Wave on and keep it close to WIDI Master.
- Now turn your instrument on, or plug WIDI Master into an instrument that is already turned on.
- Wave should connect automatically to WIDI Master.
- When WIDI Master is searching for a connection it flashes a blue light, which becomes steady when it connects to a device.
If Wave does not connect:
- Try unplugging WIDI Master and plugging it back in
- Try turning your instrument on and off
- Make sure neither device is connected to anything else, for example your computer or Wavefront.
Comments
Article is closed for comments.